Våbenteknisk Forum - VTF

Aimpoint CompM4 Accucam
Quick Detach Cantilever
Mounting Base

The New Aimpoint CompM4 Accucam QD Cantilever Mounting Base provides you with two inches of additional eye relief, while also providing space behind the CompM4 for an Aimpoint 3X Magnifier or PVS-14 Monocular. Tactical flexibility is highly valued in urban combat, and the New Aimpoint CompM4 Accucam QD Cantilever Mounting Base fills that need. This New Mounting Base allows the end user to quickly switch between optics and still maintain “on target” repeatability.

The Aimpoint CompM4 is a rugged optic, however if by chance it should fail, the end user can choose between quickly deploying the weapons back up iron sight, and sighting through the CompM4, or quickly remove the scope and deploy the back up iron sight. By using the Aimpoint CompM4 Accucam Quick Detach Cantilever Mounting Base, the optic can quickly be installed on a dovetail rail by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. The unique cam design is fully adjustable to fit both Weaver and MIL-STD-1913 dovetails, and allows you to adjust the tension to accommodate out-of-spec or worn dovetails.

In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof. The New GG&G Aimpoint CompM4 Accucam Quick Detach Cantilever Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and Type III hard-coat anodized matte black to meet mil-spec. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black to mil-spec.


Det er muligt at jeg har alle de våben jeg behøver, men jeg har ikke alle de våben jeg ønsker.

SHOTGUN SLING MOUNT
Mfr:GG&G, INC.
Price:$11.99 - $29.99
Allows Smooth, Unrestricted Sling Movement
Designed for tactical operations, these mounts place the rear sling attachment point in front of the operator, so you can quickly shoulder your weapon without getting tangled. Allows single point sling attachment, or use with a front sling mount for two-point sling installation. Loop accepts slings up to 1¼" wide. Rear Mount installs directly behind receiver, in front of buttstock. Precision machined from aluminum billet, then hardcoat anodized matte black. Right hand model for Remington 870, 1100, and 11-87 positions sling on left side of stock. Ambi model for Remington 870, 1100, and 11-87 accepts HK-style clasps and other clip-on sling fasteners. Benelli version fits M1, M3, and Super 90 combat shotguns, and can be positioned with the loop on either side of the receiver to accommodate right- or left-handed shooters. Rem Front Mount positions the sling on the right side for Remington shotguns with external retention type magazine caps. Moss Front Mount positions the sling on either the right or left side on Mossberg 500. On both models, a ball bearing detent locks mount into magazine cap to prevent rotation. Machined from AS-35 Geneva steel, then manganese phosphate finished.

SPECS: Rem Rear Mount - Aluminum, matte black. ¼" (6.4mm) long, 113#8260;16" (4.6cm) wide, 17#8260;8" (4.8cm) high. Fits 870/1100/11-87, Right Hand only. Rem Ambi Rear Mount - Aluminum, matte black. ¼" long, 2¼" (5.7cm) wide, 17#8260;8" high. Fits 12 gauge Rem 870/1100/11-87. Also fits large-frame 20 gauge Rem. 870. Benelli Rear Mount - Aluminum, matte black. 3#8260;16" (4.8mm) long, 115#8260;16" (4.8cm) wide, 131#8260;32" (5cm) high. Fits M1/M3/Super 90, Ambidextrous. Rem Front Mount - AS-35 Geneva steel, matte black. 7#8260;64" (2.6mm) long, 2¼" (5.6cm) wide, 1½" (3.8cm) high. Fits 870/1100/11-87 with early style external retention magazine caps. Moss Front Mount - AS-35 Geneva steel, matte black. 7#8260;64" (2.6mm) long, 2" (5.1cm) wide, 19#8260;16" (4.1cm) high. Fits Mossberg 500 only.


I don`t shoot innocent animals, only the ones that looks guilty