26-10-2006, 12:59 PM
NEW! – Model 2400 Match Precision
Case Trimming Lathe
![[Image: 2400casetrim.jpg]](http://www.redding-reloading.com/media/2400casetrim.jpg)
Redding "case trimming lathes" are the only case trimmers on the market that turn the case and not the cutter. This feature guarantees a perfectly square case mouth with every cut.
The new Model #2400 Case Trimming Lathe uses the extended cast iron frame of our Model #1400-XT to maximize case length capacity.
The innovative new push button chuck lock simplifies loading and unloading while facilitating perfect alignment of the case and pilot. The design of the new push button chuck lock also increases case length capacity; accommodating not only the latest long action cartridges but old time classics as well. Case lengths up to 3-1/4" can be handled.
The most noteworthy feature is the new Micrometer which adds precision and repeat-ability to the case length adjustment. Changes of as little as .001" can be easily dialed in.
The Model 2400 Case Trimming Lathe is supplied with the following:
• Universal collet (no others to buy)
• Replaceable Titanium Nitride (TiN) coated cutter
• Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.
ITEM NO. 24000 . . . . $ 198.00
Model 2400 features:
• New micrometer…easy adjustments of .001".
• Cast iron frame to maintain precision alignment.
• New push button collet chuck is ideally suited for use with optional power adapter.
• Handles 3-1/4" case length.
• Universal collet fits all popular cases – no others to buy.
• TiN (Titanium Nitride) coated replaceable cutter.
• Storage holes for pilots.
![[Image: casetrim2.jpg]](http://www.redding-reloading.com/media/casetrim2.jpg)
3/16” Shank Pilots may also be used on Hornady and Forster trimmers.
![[Image: casetrim3.jpg]](http://www.redding-reloading.com/media/casetrim3.jpg)
Universal Collet accepts all popular cases – no others to buy!
![[Image: casetrim4.jpg]](http://www.redding-reloading.com/media/casetrim4.jpg)
New replaceable (TiN) Titanium Nitride Coated high speed cutters.
![[Image: casetrim5.jpg]](http://www.redding-reloading.com/media/casetrim5.jpg)
Optional Power Adapter with 1/4” hex for use with cordless screwdrivers.
ITEM NO. 14025 . . $12.60
ITEM NO. 14040 TiN Cutter (17 & 20 caliber)* $ 25.80
ITEM NO. 14045 TiN Cutter & Shaft Complete 33.00
ITEM NO. 14050 TiN Cutter (Standard) 25.80
ITEM NO. 15XXX Pilots 5.10
Refer to die reference chart for other pilot sizes.
* Note: Our 17 and 20 caliber pilots have a 5/32” shank, therefore, our #14040 cutter will interchange with RCBS.
http://www.redding-reloading.com/
Mvh
Kim
Jeg er ikke fejlfri,men det er så tæt på at det skræmmer mig.
Case Trimming Lathe
Redding "case trimming lathes" are the only case trimmers on the market that turn the case and not the cutter. This feature guarantees a perfectly square case mouth with every cut.
The new Model #2400 Case Trimming Lathe uses the extended cast iron frame of our Model #1400-XT to maximize case length capacity.
The innovative new push button chuck lock simplifies loading and unloading while facilitating perfect alignment of the case and pilot. The design of the new push button chuck lock also increases case length capacity; accommodating not only the latest long action cartridges but old time classics as well. Case lengths up to 3-1/4" can be handled.
The most noteworthy feature is the new Micrometer which adds precision and repeat-ability to the case length adjustment. Changes of as little as .001" can be easily dialed in.
The Model 2400 Case Trimming Lathe is supplied with the following:
• Universal collet (no others to buy)
• Replaceable Titanium Nitride (TiN) coated cutter
• Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.
ITEM NO. 24000 . . . . $ 198.00
Model 2400 features:
• New micrometer…easy adjustments of .001".
• Cast iron frame to maintain precision alignment.
• New push button collet chuck is ideally suited for use with optional power adapter.
• Handles 3-1/4" case length.
• Universal collet fits all popular cases – no others to buy.
• TiN (Titanium Nitride) coated replaceable cutter.
• Storage holes for pilots.
3/16” Shank Pilots may also be used on Hornady and Forster trimmers.
Universal Collet accepts all popular cases – no others to buy!
New replaceable (TiN) Titanium Nitride Coated high speed cutters.
Optional Power Adapter with 1/4” hex for use with cordless screwdrivers.
ITEM NO. 14025 . . $12.60
ITEM NO. 14040 TiN Cutter (17 & 20 caliber)* $ 25.80
ITEM NO. 14045 TiN Cutter & Shaft Complete 33.00
ITEM NO. 14050 TiN Cutter (Standard) 25.80
ITEM NO. 15XXX Pilots 5.10
Refer to die reference chart for other pilot sizes.
* Note: Our 17 and 20 caliber pilots have a 5/32” shank, therefore, our #14040 cutter will interchange with RCBS.
http://www.redding-reloading.com/
Mvh
Kim
Jeg er ikke fejlfri,men det er så tæt på at det skræmmer mig.