Load From A Disk

[yeti]

Det kan man ikke [xx(]

Se svaret fra LoadAmmo:

quote:

---

Mikkel,

Load From a Disk always develops optimum loads based on an 80% - 90% load
density and a working pressure of 40,000 CUP to 50,000 CUP, based on input
information from the user. The powders LFDW picks (usually 5 to 10) meet
these criteria. If your favorite powder is not shown then it does not meet
the criteria shown above. The program contains a powder database of about 85
powders. Only a few powders can be used with any load combination because of
the reasons given above. This is discussed on page 49, question 6.0 in the
Instruction Manual and in our FAQ section at http://www.loadammo.com. The
Instruction Manual is included on the program disk. See the Startup Guide
that came with the program on how to access the Instruction Manual.

We have found that the optimal load data track very well with information
from loading manuals, keeping in mind that there are differences even
between manuals. Bullet seating depth and varying brass thickness can affect
the powder space and powder charge.

Regards,

Wayne Blackwell

----- Original Message -----
From: "Mikkel Kroeyer" <mikkel@kroeyer.com>
To: <info@loadammo.com>
Sent: Monday, October 06, 2008 11:07 AM
Subject: Selecting powder

Hi,

I have just received the copy of Load From A Disk I have bought and have
tried to key my favorit load in. It is a 9,3x62 with Barnes TSX 250 grs
and Norma 202 powder. Things went well untill I wanted to select the
powder, but no Norma powder showed up on the list. What am I doing
wrong???

Mikkel

---