Tråd vurdering:
  • 0 stemme(r) - 0 gennemsnitligt
  • 1
  • 2
  • 3
  • 4
  • 5
Trofæplade , inspiration !
#1
Hej . Så har jeg været ved at klydde lidt igen .

Jeg havde en rest fra en bordplade som jeg tænkte jeg ville prøve at lave en speciel trofæplade ud af .

Det gik mere smertefrit end jeg havde regnet med , og i skal lige se hvad der kom ud af det , som inspiration til snitterne .

Den er til den hjort jeg lige har skudt i polen . Designet er fremkommet ved at se på forskellige modeller man kan købe færdig .

[Image: dscn0890.jpg?t=1254567624]

Savet ud med stiksav .

[Image: dscn0892.jpg?t=1254568599]

Og så bare igang med hulhjernet .

[Image: dscn0895.jpg?t=1254568750]

Snitte snit , snit snit og vupti , så ser det sådan ud [Smile].

[Image: dscn0897.jpg?t=1254568873]

Lidt bejdse på og færdig . Det har taget mig ca. 4,5 timer . Jeg må sige det blev meget bedre end jeg havde regnet med , og det var ikke særlig svært , da der jo er plads til lidt kunstnerisk udfoldelse .

[Image: dscn0898.jpg?t=1254569208]

Hilsen A-bolt
Svar
#2
wooowww!! it's great! you are an artist....respectSmile I can make everything with piece of wood, but no carving. Have you tried to make some carving on gunstocks? I do not want to be too critical, but dont you think its much better to use one piece of wood instead of glued wood? Best Regards!

Martin
One shot one kill....no luck, just skill
Svar
#3
Hej Martin . It was a piece of wood i have no else use fore .

I have made 3 riflestocks , on the last one the checkering is stil not done .

http://www.riffeljagt.com/forum/code/top...C_ID=13762

Hilsen A-bolt
Svar
#4
Veni, Vidi, Vici.... I have no questions. Great job once again. Some day i will also try with some old rifle. In my opinion there shuldn't be any complicated pattern of checkering....but its only my opinion Smile That wood you use....is from USA? And what is that Arcaglass?
Best regards!
Martin

Martin
One shot one kill....no luck, just skill
Svar
#5
Hej mkpl . It is California Walnut and yes , it is going to get a simpel checkering .

Acraglas ; http://www.brownells.com/.aspx/pid=1038/...S_GEL_reg_ . For a tight fit between metal and wood and top precision shot groups .

Hilsen A-bolt
Svar
#6
I do not want to be disruptive with my questions, but how do you get it? Recently I tried to order the Tru Oil from USA and I received information that the harmful and dangerous substances they do not send overseas. Tru Oil I was found in. .. Poland, so there is no problem, but I do not think Acraglass also was there, I think of it is good to have it in the workshop.

Regards!
Martin

Martin
One shot one kill....no luck, just skill
Svar
#7
Here http://www.skyttebutik.dk/search.asp?key...S%F8g+vare is a way to buy Acraglas . The green is the best to work with , and there is enough for several guns .
Svar
#8
thank you very much! If I can help you somehow...just ask me Smile

Regards!
Martin

Martin
One shot one kill....no luck, just skill
Svar
#9
Et stykke gammel vinduesplade .

[Image: DSCN1455.jpg]

Smörebröt smörebröt rum tum tum og Hug hug snitte snit

[Image: DSCN1457-1.jpg]

Sjaske sjask lidt lak

[Image: DSCN1463.jpg]

Slut prut færdig [Smile]

[Image: DSCN1465.jpg]
Svar
#10
WOW du får det til at lyde nemt[:p]
Jeg antager at der er lidt mere til det end som så, men flot arbejde!!

Hilsen

Frederik

24 beers in a case, 24 hours a day, coincidence?? I think not!
Paul Newman
24 beers in a case, 24 hours a day, coincidence?? I think not!
Paul Newman
Svar
#11
Tidsspild !

Ja man kan da altid spilde lidt tid på en stump tjørn , endtil det næste skæfteprojekt dukker op .

[Image: DSCN1471.jpg]

[Image: DSCN1478.jpg]

[Image: DSCN1484.jpg?t=1354194570]
Svar
#12
Hvis man ikke lige vil have sit rævetrofæ til at ligge i vinduet eller på bordet ...

(Sikke noget rod med photobucket !!)

[Image: 1b7a5b63-2a85-40c4-b567-9a2cdb6f1dfd_zpswyxgamwi.jpg][/URL]
Svar


Forum spring:


Brugere der kigge i denne tråd: 1 gæst(er)