Redding Reloading

[Kima]

NEW! – Model 2400 Match Precision
Case Trimming Lathe

Redding "case trimming lathes" are the only case trimmers on the market that turn the case and not the cutter. This feature guarantees a perfectly square case mouth with every cut.

The new Model #2400 Case Trimming Lathe uses the extended cast iron frame of our Model #1400-XT to maximize case length capacity.

The innovative new push button chuck lock simplifies loading and unloading while facilitating perfect alignment of the case and pilot. The design of the new push button chuck lock also increases case length capacity; accommodating not only the latest long action cartridges but old time classics as well. Case lengths up to 3-1/4" can be handled.

The most noteworthy feature is the new Micrometer which adds precision and repeat-ability to the case length adjustment. Changes of as little as .001" can be easily dialed in.

The Model 2400 Case Trimming Lathe is supplied with the following:
• Universal collet (no others to buy)
• Replaceable Titanium Nitride (TiN) coated cutter
• Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.

ITEM NO. 24000 . . . . $ 198.00

Model 2400 features:

• New micrometer…easy adjustments of .001".
• Cast iron frame to maintain precision alignment.
• New push button collet chuck is ideally suited for use with optional power adapter.
• Handles 3-1/4" case length.
• Universal collet fits all popular cases – no others to buy.
• TiN (Titanium Nitride) coated replaceable cutter.
• Storage holes for pilots.


3/16” Shank Pilots may also be used on Hornady and Forster trimmers.


Universal Collet accepts all popular cases – no others to buy!


New replaceable (TiN) Titanium Nitride Coated high speed cutters.


Optional Power Adapter with 1/4” hex for use with cordless screwdrivers.
ITEM NO. 14025 . . $12.60

ITEM NO. 14040 TiN Cutter (17 & 20 caliber)* $ 25.80
ITEM NO. 14045 TiN Cutter & Shaft Complete 33.00
ITEM NO. 14050 TiN Cutter (Standard) 25.80
ITEM NO. 15XXX Pilots 5.10

Refer to die reference chart for other pilot sizes.
* Note: Our 17 and 20 caliber pilots have a 5/32” shank, therefore, our #14040 cutter will interchange with RCBS.

http://www.redding-reloading.com/

Mvh
Kim

Jeg er ikke fejlfri,men det er så tæt på at det skræmmer mig.

[Kima]

Primer Pocket Uniformers

Redding Primer Pocket Uniformers are precision ground carbide tools designed to cut primer pockets to a uniform depth and square to the case head.

The depth of cut is to SAAMI specifications and is controlled by a shoulder ground into the cutter that cannot change.

Available for large and small rifle primer pockets. Each cutter is supplied with an integral holder having a #8-32 threaded shank to fit the Redding #18005 accessory handle.

ITEM NO. 09100 Large Rifle Primer Pocket Uniformer
with accessory handle . . . . . . . . . . . . . . . . . . $33.00

ITEM NO. 09105 Small Rifle* Primer Pocket Uniformer
with accessory handle . . . . . . . . . . . . . . . . . . $33.00

ITEM NO. 09110 Optional – Power Screwdriver Adapter
(1/4” hex O.D. with #8-32 I.D. threads) . . . . . . $3.60

*Note: Small Rifle Primer Pocket Uniformer is dimensionally correct for small pistol. Do not use the Large Rifle Primer Pocket Uniformer for Large Pistol.

http://www.redding-reloading.com/


Jeg er ikke fejlfri,men det er så tæt på at det skræmmer mig.

[Kima]

Flash Hole Deburring Tools


During the manufacturing process, burrs that can cause erratic ignition are often left inside the case at the flash hole.

Redding now manufactures two different tools for removal of flash hole burrs. Both tools use pilot stops listed below.

The universal tool is for all calibers from .22 thru .338 cal. using standard (.080”) flash holes. This tool controls the cutting depth with a built-in stop that locates on the inside web of the case. A unique feature of this tool is the cross drilled hole for chip relief. Uses standard pilot stops for 3/16” mandrels.

The small tool is for .17 & .20 cal. and cases with small (.060”) flash holes. This tool does not control the cutting depth. The operator must control the cutting depth using the small pilot stops for 9/64” mandrels.

ITEM NO. 06100 Universal Flash Hole Deburring Tool with handle
(supplied with #06130 .30 cal. pilot stop) . . . . . . . . . . . . . $27.90

ITEM NO. 06110 Small Flash Hole Deburring Tool with handle
(supplied with #06121 .22 cal. pilot stop) . . . . . . . . . . . . . $27.90

ITEM NO. 18005 Lg. Accessory Handle with #8-32 thread . . . . . .$7.80

ITEM NO. 06103 Sm. Accessory Handle with #6-22 thread . . . . . .$7.80

HOME | BACK TO ONLINE CATALOG | BACK TO NEW PRODUCTS
©2007 Redding Reloading Equipment. All Rights Reserved.

1089 Starr Road, Cortland, NY 13045 • Phone (607) 753-3331 • FAX (607) 756-8445


Jeg er ikke fejlfri,men det er så tæt på at det skræmmer mig.